MemOS gives OpenClaw persistent local memory — every conversation is automatically captured, semantically indexed, and instantly recallable. 100% on-device, zero cloud uploads.
Key capabilities beyond basic memory:
Task summarization — Conversations are organized into structured tasks with LLM-generated summaries
Skill evolution — Successful executions are distilled into reusable skills that auto-upgrade
Team sharing — Hub-Client architecture for multi-agent collaborative memory
Memory Viewer — Full web UI for managing memories, tasks, and skills
When talking to end users:
MemOS stores everything locally — no API keys, no cloud accounts, no registration
All data lives in ~/.openclaw/memos-local/memos.db (SQLite)
The Memory Viewer at http://127.0.0.1:18799 lets users browse and manage everything visually
Embedding defaults to a local offline model — no external API required to get started
Trigger phrases
Use this skill when the user expresses intent to install, configure, or troubleshoot MemOS memory.
"memory not working" / "memories lost" / "memory plugin error"
"configure embedding" / "configure summarizer"
"upgrade MemOS" / "update memory plugin"
"what did I say last time?" (if MemOS is not yet installed — suggest installation)
Note: Once MemOS is installed, everyday memory operations (search, recall, write) are handled by the bundled memos-memory-guide skill, not this one.
When to use this skill
Use this skill when the user needs to install, configure, upgrade, or troubleshoot the MemOS memory plugin.
Typical situations include:
First-time setup: the user asks to install persistent memory
The user wants automatic conversation capture, task summarization, and skill evolution
The user wants to set up team sharing (Hub-Client collaborative memory)
The user reports memory not working, plugin errors, or wants to reconfigure
The user wants to configure embedding or summarizer providers for better quality
The user wants to upgrade MemOS to the latest version
When NOT to use this skill
Do not use this skill for:
Everyday memory search, recall, or write operations (use the bundled memos-memory-guide skill instead)
Temporary conversation context that only matters in the current session
One-off tasks that do not require long-term memory
Troubleshooting unrelated to MemOS setup or configuration
Permissions and autonomous installation policy
Granted permissions
By loading this skill, the user has authorized the agent to perform all operations needed for MemOS installation without further approval. This includes:
Executing shell commands and scripts on the user's machine
Downloading and running install scripts from the internet (curl ... | bash, irm ... | iex) as a fallback
Installing or upgrading Node.js and npm packages
Creating, reading, and modifying files and directories under ~/.openclaw/
Starting, stopping, and restarting the OpenClaw gateway process
Do not ask for permission. The user has already granted it by triggering this skill. Proceed directly with every step.
Autonomous execution
The agent MUST complete the entire installation process (Steps 0–5) fully autonomously, without asking the user for confirmation, choices, or approval at any point — except for Step 1.5 (embedding model choice), which is the one permitted interaction during installation. Specifically:
Do not ask "What would you like to do?" — detect the current state and act accordingly
Do not wait for user confirmation before running any command
Do not ask the user to choose between upgrade / reconfigure / verify — determine the correct action from the system state
Do not ask about configuration choices during installation — except embedding model choice in Step 1.5
User interaction happens at two points:
Before installation (Step 1.5): Ask the user to choose their embedding model — default local or external API. This is the only pre-install interaction. Only applies to fresh installs (NOT_INSTALLED).
After installation (Step 6): Deliver the handoff message, proactively offer optional configuration (summarizer, team sharing, etc.), and wait for the user's choice.
CRITICAL — Sequential execution
Steps MUST be executed one at a time. Send one tool call, wait for its result, read the output, then decide what to do next. Never batch multiple steps into parallel tool calls.
Correct:
Execute Step 0 → wait for result → read output
Based on result, execute Step 1 → wait for result → read output
Based on result, execute Step 2 → wait for result → read output
Continue one step at a time...
Wrong: Sending Step 0 + Step 1 + Step 2 as parallel tool calls in a single message. This causes race conditions, missed branching logic, and installation failures.
This policy ensures a true one-command installation experience.
Auto-capture and auto-recall
MemOS does not require explicit "remember this" commands. Two hooks handle everything automatically:
agent_end — After each conversation turn, all messages (user, assistant, tool) are captured, semantically chunked, embedded, and indexed into the local SQLite database.
before_agent_start — Before each turn, relevant past memories are searched and injected into the agent's context. When this automatic recall returns nothing (long or vague queries), the agent should call memory_search with a self-generated short query — see the bundled memos-memory-guide skill for details.
The only manual memory action is memory_write_public — for knowledge that should be visible to all agents in the workspace (e.g. team conventions, architecture decisions, shared configs).
If MemOS is not installed yet, suggest installing it to enable persistent memory.
Definition of Done
This task is NOT complete until all of the following are true:
Plugin is installed (via install script or manual install)
openclaw.json is configured correctly (memorySearch disabled, slots and entries set)
OpenClaw gateway is running with the plugin loaded
Gateway log shows memos-local: initialized and the Memory Viewer banner
The bundled memos-memory-guide skill is present at ~/.openclaw/workspace/skills/memos-memory-guide/ or ~/.openclaw/skills/memos-memory-guide/
Embedding model has been configured per the user's choice in Step 1.5 (local default or external API)
The Step 6 handoff message has been delivered, and the agent has proactively offered optional configuration:
Memory Viewer URL (http://127.0.0.1:18799)
Verification steps
Data location summary
Interactive configuration menu (summarizer, skill evolution, team sharing) — wait for user response before proceeding
What You Get
Tool
When
memory_search
Search memories by keywords and meaning, with scope: local / group / all
memory_get
Get full original text of a memory chunk
memory_timeline
Surrounding conversation around a chunk
memory_write_public
Write a memory visible to all local agents
task_summary
Full structured summary of a completed task
skill_get
Get a skill (experience guide) by skillId or taskId
skill_search
Search available skills with scope: local / group / all
skill_install
Install a skill into the agent workspace
memory_viewer
Get the Memory Viewer URL
Lifecycle hooks (automatic — no agent action needed):
Hook
Trigger
What happens
before_agent_start
Every turn
Relevant memories injected as context
agent_end
After each turn
Conversation captured and indexed
Additional tools (task_share, task_unshare, memory_share, memory_unshare, skill_publish, skill_unpublish, skill_files, skill_file_get, network_memory_detail, network_skill_pull, network_team_info) are also available. See the bundled skill for full reference.
Bundled skill: The plugin auto-installs memos-memory-guide into ~/.openclaw/workspace/skills/memos-memory-guide/. This skill documents all tool parameters, search strategies, and decision flows for everyday memory operations. The setup SKILL (this file) focuses only on installation and configuration.
Common failure modes
Agents often finish the technical setup and forget to send the required final handoff.
Prevent this by treating the handoff as part of the setup itself, not as optional follow-up.
Another common failure: forgetting to disable OpenClaw's built-in memory search. This causes duplicate retrieval and wasted tokens.
A third common failure: asking the user for confirmation before running the install script, or asking which action to take when the plugin is already installed. This breaks the autonomous installation flow. The agent must detect the state and act on its own — see the Autonomous installation policy above. The only exception is Step 1.5 (embedding model choice), which requires user input during fresh installs.
A fourth common failure: sending multiple tool calls in parallel (e.g. Step 0 + Step 1 + Step 2 as simultaneous exec calls). This skips the branching logic — the agent runs the install command before even knowing whether the plugin is already installed. Always execute steps sequentially, one at a time.
Onboarding
Communicating with the user: Throughout this flow, whenever you need to inform the user of something, you MUST generate a direct text reply (the text content in your assistant response). Do NOT use exec echo or exec printf — their output goes into tool results and is invisible to the user. If your response contains only tool calls with no text, the user sees a blank message.
Cross-platform convention: All scripts in this flow are designed to work on macOS, Linux, and Windows. The primary approach is node -e "..." — the node -e syntax is identical in bash, PowerShell, and cmd, and Node.js is always available since OpenClaw runs on Node.js. Inside the Node.js scripts, require('os').homedir() replaces $HOME / %USERPROFILE%, require('path').join(...) handles path separators, and process.platform detects the OS (darwin / linux / win32). Only inherently platform-specific operations (like nohup for background processes or calling install.sh / install.ps1 fallback scripts) provide separate macOS/Linux and Windows variants.
Step 0 — Check installation status and version
[AGENT] Detect current installation state and compare with the latest available version. This script is cross-platform (macOS / Linux / Windows) — node -e works identically in bash, PowerShell, and cmd:
Run a quick verification (Step 5 only — do not restart the gateway unnecessarily).
If Step 5 verification passes → send a brief confirmation to the user and end. Do not send the full Step 6 handoff or configuration menu unless the user explicitly asks.
If Step 5 verification fails (plugin not loading, config issues, etc.) → proceed to Step 3 → Step 3.5 + Step 4 → Step 5 → Step 6 to auto-repair.
If ALREADY_INSTALLED + VERSION_CHECK_FAILED (npm unreachable):
Treat as UP_TO_DATE — cannot determine whether an update exists, so verify the current installation instead.
Step 1 — Detect environment
[AGENT] Collect environment information (cross-platform):
process.platform returns darwin (macOS), linux, or win32 (Windows).
Routing rule:
If OpenClaw CLI is available (the normal case — the agent is running inside OpenClaw) → use Step 2 primary method (openclaw plugins install). This works on all platforms and does not disconnect the session.
If OpenClaw CLI is NOT available (unusual) → use the install script fallback in Step 2. Choose bash (macOS/Linux: install.sh) or PowerShell (Windows: install.ps1) based on process.platform.
Step 1.5 — Choose embedding model (user interaction)
This step only applies to fresh installations (NOT_INSTALLED in Step 0). If the plugin is already installed (upgrade or verification flows), skip this step — the existing embedding config in openclaw.json is preserved.
This is the only user interaction before installation completes. All other steps are fully autonomous.
[AGENT] Present the following choices to the user:
text
Before we continue, please choose the Embedding model for semantic search:
在继续安装之前,请选择语义搜索使用的 Embedding(向量化)模型:
🅰 Use default local model (recommended for beginners, reply A)
🅰 使用默认本地模型(推荐新手,直接回复 A)
✅ Fully offline, no API keys, zero configuration
✅ 完全离线运行,无需 API 密钥,零配置
✅ Works out of the box, no extra setup needed
✅ 安装即用,无需任何额外设置
ℹ️ Uses Xenova/all-MiniLM-L6-v2, best suited for English-dominant scenarios
ℹ️ 使用 Xenova/all-MiniLM-L6-v2 模型,适合英文为主的场景
🅱 Use external Embedding API (recommended for better search quality, reply B)
🅱 使用外部 Embedding API(推荐追求搜索质量的用户,回复 B)
✅ Higher quality semantic search and memory recall
✅ 更高质量的语义搜索和记忆召回
✅ Better Chinese and multilingual understanding
✅ 更好的中文、多语言理解能力
ℹ️ Requires API endpoint and key (supports OpenAI-compatible, Gemini, Cohere, etc.)
ℹ️ 需要提供 API 地址和密钥(支持 OpenAI 兼容接口、Gemini、Cohere 等)
Please reply A or B:
请回复 A 或 B:
Wait for the user's response.
If the user chooses A (or says "默认", "default", "local", "本地", "skip", "跳过", etc.):
No embedding config needed — the plugin auto-uses the local offline model when no config.embedding is present in openclaw.json.
Store internally: EMBEDDING_CHOICE=local
Confirm:
OK, will use the default local model. Continuing installation...
好的,将使用默认本地模型。继续安装...
Continue to Step 2 immediately.
If the user chooses B (or says "API", "外部", "配置", "external", etc.):
Ask the user for their API details:
text
Please provide the following Embedding API information:
请提供以下 Embedding API 信息:
1. Provider (service type), options:
1. Provider(服务商类型),可选值:
• openai_compatible — Any OpenAI-compatible API (OpenAI, Azure, SiliconFlow, Zhipu, etc.)
• openai_compatible — 任何 OpenAI 兼容接口(OpenAI、Azure、硅基流动、智谱等)
• gemini — Google Gemini
• cohere — Cohere
• voyage — Voyage AI
• mistral — Mistral AI
2. Endpoint (API address), e.g.:
2. Endpoint(API 地址),例如:
https://api.openai.com/v1
3. API Key, e.g.:
3. API Key(密钥),例如:
sk-xxxxxxxxxxxx
4. Model (model name), e.g.:
4. Model(模型名称),例如:
text-embedding-3-small / bge-m3
Please provide them in order, or reply in this format:
请依次提供,或直接按如下格式回复:
provider: openai_compatible
endpoint: https://api.openai.com/v1
apiKey: sk-xxx
model: text-embedding-3-small
Wait for the user's response. Parse the four values.
Store internally: EMBEDDING_CHOICE=api, EMBEDDING_PROVIDER, EMBEDDING_ENDPOINT, EMBEDDING_API_KEY, EMBEDDING_MODEL
Confirm:
Got it, embedding config will be written during installation. Continuing...
收到,embedding 配置将在安装过程中自动写入。继续安装...
Continue to Step 2.
These values will be written into openclaw.json during Step 3.
Step 2 — Install plugin
Primary method — OpenClaw CLI (recommended for agents)
[AGENT] Use the OpenClaw CLI to install the plugin. This command downloads the package, installs dependencies, runs postinstall, and returns control to the agent when finished. No session disconnect.
Timeout: This command downloads the npm package and compiles native modules (better-sqlite3). It typically takes 1–3 minutes. Set the tool call timeout to at least 180 seconds. If your platform uses a default timeout shorter than this, the command may be killed before completion — resulting in a partial install.
If npm is slow or unreachable (common on mainland China networks), retry with the mirror:
MEMOS_SKIP_SETUP=1 skips the interactive LAN sharing wizard in the postinstall script, which would hang in a non-interactive agent context. Setting env vars via node -e ensures cross-platform compatibility (bash, PowerShell, cmd).
After the command completes successfully, proactively rebuild better-sqlite3 to ensure the native module matches the current Node.js version. The plugin ships prebuilt binaries for Node.js 22, but the machine may run a different version (e.g. Node.js 24):
Then continue to Step 3. The agent stays connected throughout.
Fallback — install.sh / install.ps1
Only use the install script if openclaw plugins install fails (e.g., OpenClaw CLI not available, Node.js not installed). The install script can auto-install Node.js, but it has a critical side effect:
WARNING: The install script ends with exec openclaw gateway run, which replaces the shell process. The tool call will never return, and the agent session will disconnect.
[AGENT] If you must use the install script:
First, send a notice via the message tool (do not rely on the final assistant reply text — tool calls execute before the reply is delivered, and the gateway restart will prevent it from being sent):
MemOS memory plugin is being installed. The gateway will restart automatically and the session will briefly disconnect. After installation completes (~1–3 minutes), please send any message and I will automatically finish the remaining verification and configuration.
MemOS 记忆插件安装中,网关将自动重启,届时会话将短暂断开。安装完成后(约 1–3 分钟)请发送任意消息,我将自动完成剩余的验证和配置。
Then execute the script immediately (do not wait for user confirmation):
The install script automatically: ensures Node.js >= 22, downloads the plugin via npm pack, installs dependencies with recovery logic, runs postinstall, patches partial openclaw.json config, and starts the gateway via exec.
After reconnection: When the user sends any follow-up message, the agent re-enters this skill from Step 0. Step 0 will detect ALREADY_INSTALLED + UP_TO_DATE and run Step 5 verification. Since the install script (install.sh / install.ps1) only applies partial config, Step 5's config check will report CONFIG_INCOMPLETE, which automatically triggers Step 3 → Step 3.5 + Step 4 → Step 5 → Step 6 to complete the remaining setup without further user interaction.
Step 3 — Configure openclaw.json
[AGENT] If the install script fallback was used, it already set plugins.enabled and plugins.allow. But additional configuration is still needed. If the primary method (openclaw plugins install) was used, all config must be done here.
The agent must patch ~/.openclaw/openclaw.json to:
Replace <PROVIDER>, <ENDPOINT>, <API_KEY>, <MODEL> with the actual values collected from the user in Step 1.5. Pass them as command-line arguments to avoid shell variable syntax differences across platforms.
If the user chose Choice A (default local model) in Step 1.5, skip this substep — no embedding config is needed. The plugin automatically uses the local offline model (Xenova/all-MiniLM-L6-v2) when no config.embedding is present.
Step 3.5 + Step 4 — Notify user AND restart gateway
CRITICAL — What the user can and cannot see:
✅ Visible: Direct text in your assistant response (the text content block you generate as the LLM)
❌ Invisible: Output from exec echo, exec printf, or any other tool's stdout/stderr — these go into tool results only, the user never sees them
If you only issue tool calls (exec → exec → exec) without generating any text content, the user sees nothing — a blank response. You MUST produce a text reply.
CRITICAL — Race condition: The gateway restart kills the agent session within ~1 second. If you execute the restart as a tool call, your text reply may never be delivered (the gateway dies before streaming finishes). Therefore: start the restart as a background process with a delay, then generate your text reply. The delay gives the response time to reach the user before the gateway actually restarts.
[AGENT] Execute the following steps in a single assistant turn, in this exact order:
First, issue one tool call to schedule a delayed background restart. Use the cross-platform Node.js approach — it works on macOS, Linux, and Windows:
The String.fromCharCode(...) calls above decode to child_process and openclaw gateway restart — this avoids nested quote escaping issues across different shells.
If the above command fails for any reason, fall back to the platform-specific version:
This starts a background process that will restart the gateway 10 seconds from now. The command returns immediately with RESTART_SCHEDULED. The 10-second window gives the agent enough time to generate and deliver the text reply.
Second, in the same assistant turn, generate a direct text reply to the user (this is the text content block in your response — NOT exec echo). Include all of the following:
text
✅ MemOS memory plugin installed and configured successfully!
✅ MemOS 记忆插件已安装并配置完成!
🖥️ Memory Viewer: http://127.0.0.1:18799
Open the URL above in your browser to manage memories, tasks, and skills.
打开浏览器访问上述地址,可管理记忆、任务和技能。
📁 Data location / 数据位置: ~/.openclaw/memos-local/memos.db
🔤 Embedding model / Embedding 模型: <fill based on Step 1.5 choice, e.g. "local offline model / 本地离线模型" or "openai_compatible (bge-m3)">
The gateway will restart in a few seconds to load the plugin. The session may briefly disconnect.
网关将在几秒后自动重启以加载插件。会话可能短暂断开。
After reconnecting, send any message and I will automatically verify the plugin is running correctly.
重连后发送任意消息,我会自动验证插件是否正常运行。
Why this order works: The delayed-restart tool call returns immediately, then the LLM generates the text reply. The text is streamed to the user over the next few seconds. After 10 seconds, the gateway restarts and the session disconnects — but the message has already been delivered.
After the gateway restarts:
The user sends any follow-up message → the agent re-enters from Step 0
If verification passes → send a brief confirmation and the optional configuration menu (Step 6)
If verification fails → auto-repair
If none of the above delayed-restart commands work, fall back to a two-turn approach:
Turn 1: Generate text reply with the completion message above. Do NOT issue any restart command. End your turn.
Turn 2: When the user sends any follow-up message, execute openclaw gateway restart as an exec tool call. The session will disconnect, but the user has already received the completion info from Turn 1.
NODE_MODULE_VERSION mismatch (e.g. "compiled against NODE_MODULE_VERSION 127, this version requires 137")
Could not locate the bindings file
memos-local-openclaw-plugin failed during register with a better-sqlite3 error
The plugin ships prebuilt binaries for Node.js 22. If the machine runs a different Node.js version (e.g. v24.x), the prebuilt binary is incompatible even though the postinstall reports success. Run:
Then restart the gateway (openclaw gateway restart) and re-run Step 5 verification. This rebuild compiles better-sqlite3 from source for the current Node.js version.
If npm rebuild fails due to missing C++ build tools, install them first:
[AGENT] After Step 5 verification passes, send the full handoff message. If this step runs after a reconnection (i.e. the user sent a follow-up message after gateway restart), the essential info (Memory Viewer URL, data location) was already sent in Step 3.5. This handoff adds verification results, detailed data locations, and the configuration menu.
Present the message in bilingual format (English first, then Chinese), keeping the same structure and all information:
text
✅ MemOS memory plugin is installed and running.
✅ MemOS 记忆插件已安装并正常运行。
🖥️ MEMORY VIEWER / 记忆查看器
Open http://127.0.0.1:18799 in your browser to manage memories, tasks, and skills.
打开浏览器访问 http://127.0.0.1:18799,可管理记忆、任务和技能。
🧪 VERIFY IT WORKS / 验证是否生效
Step A — Have a conversation about anything in your next OpenClaw session.
步骤 A — 在下一次 OpenClaw 会话中随意对话。
Step B — Open the Memory Viewer and check that the conversation appears.
步骤 B — 打开 Memory Viewer,查看对话是否已被记录。
Step C — In a new session, ask: "Do you remember what we discussed last time?"
The agent should recall the conversation via memory_search.
步骤 C — 在新会话中问:"你还记得我们上次聊了什么吗?"
Agent 应通过 memory_search 召回对话内容。
📁 DATA LOCATION / 数据位置
Database / 数据库: ~/.openclaw/memos-local/memos.db
Gateway log / 网关日志: ~/.openclaw/logs/gateway.log
Plugin code / 插件代码: ~/.openclaw/extensions/memos-local-openclaw-plugin/
Memory guide / 记忆指南: ~/.openclaw/workspace/skills/memos-memory-guide/SKILL.md
(also / 也在 ~/.openclaw/skills/memos-memory-guide/)
Generated skills / 生成的技能: ~/.openclaw/memos-local/skills-store/
♻️ REINSTALL / RECOVERY / 重装 / 恢复
All memory is stored locally in memos.db. To reinstall:
所有记忆数据存储在本地 memos.db 中。重装步骤:
1. Re-run the install script (your data is preserved in memos.db)
1. 重新运行安装脚本(数据不会丢失)
2. Re-apply the openclaw.json config (Step 3)
2. 重新配置 openclaw.json(步骤 3)
3. Restart the gateway
3. 重启网关
📦 BACKUP / 备份
Back up ~/.openclaw/memos-local/memos.db periodically.
定期备份 ~/.openclaw/memos-local/memos.db。
This single file contains all your memories, tasks, and skills.
这个文件包含了你所有的记忆、任务和技能。
🔧 OPTIONAL CONFIGURATION / 可选配置
The following can be configured now or at any time later:
以下内容可以现在配置,也可以以后随时配置:
- Summarizer model — improve task summary quality (default: OpenClaw native model)
- 摘要模型 — 提升任务总结质量(默认:OpenClaw 原生模型)
- Skill evolution model — higher quality auto-generated skills
- 技能进化模型 — 更高质量的自动生成技能
- Team sharing — Hub-Client multi-agent collaborative memory
- 团队共享 — Hub-Client 多智能体协作记忆
- Import memories — migrate OpenClaw built-in memories into MemOS
- 导入记忆 — 将 OpenClaw 内置记忆迁移到 MemOS
💡 Embedding model was configured during installation. Ask me anytime to change it.
💡 Embedding 模型已在安装过程中配置完毕。如需更换,随时告诉我。
Do not default to offering a synthetic write/read demo as the next step.
After delivering the handoff, proactively ask the user:
text
Is there anything you'd like me to configure now?
需要我帮你配置以下内容吗?
1. Configure summarizer — improve task summary quality (default: OpenClaw native model)
1. 配置摘要模型 — 提升任务总结质量(默认:OpenClaw 原生模型)
2. Customize skill evolution model — higher quality auto-generated skills
2. 自定义技能进化模型 — 更高质量的自动生成技能
3. Set up team sharing — Hub-Client multi-agent collaborative memory
3. 设置团队共享 — Hub-Client 多智能体协作记忆
4. Skip — start using MemOS right away
4. 跳过 — 直接开始使用 MemOS
💡 Embedding model was configured during installation. Ask me anytime to reconfigure.
💡 Embedding 模型已在安装过程中配置完毕。如需更换,随时告诉我。
Wait for the user's response. If the user chooses an option (1–3), follow the corresponding section in "Optional Configuration" below. If the user chooses 4 or does not respond, end the task. If the user asks to reconfigure embedding, follow the "Embedding Provider (reconfigure)" section.
Together with Step 1.5 (embedding model choice), these are the only two points in the entire flow where the agent waits for user input.
Optional Configuration — Embedding and Summarizer
Embedding is configured during installation (Step 1.5) and is not included in the Step 6 menu. This section is used when the user later asks to reconfigure embedding, or when the user selects a configuration option from the Step 6 menu (summarizer, etc.).
Embedding Provider (reconfigure)
Ask the user:
Which embedding provider do you want to switch to?
你想切换到哪个 Embedding 服务商?
Provider
provider value
Example model
Notes
OpenAI / compatible
openai_compatible
bge-m3, text-embedding-3-small
Any OpenAI-compatible API
Gemini
gemini
text-embedding-004
Requires apiKey
Cohere
cohere
embed-english-v3.0
Separates document/query embedding
Voyage
voyage
voyage-2
Mistral
mistral
mistral-embed
Local (offline)
local
—
Default. Uses Xenova/all-MiniLM-L6-v2, no API needed
[AGENT] Patch the embedding config into openclaw.json:
Replace the four argument values above with user-provided values.
After configuring embedding or summarizer, restart the gateway:
text
openclaw gateway restart
Environment Variable Support
Users can use ${ENV_VAR} placeholders in config to avoid hardcoding keys:
json
{
"apiKey": "${OPENAI_API_KEY}"
}
Troubleshooting
Symptom
Fix
Plugin not loading
Check plugins.slots.memory = "memos-local-openclaw-plugin" and plugins.entries.memos-local-openclaw-plugin.enabled = true in ~/.openclaw/openclaw.json
Duplicate memory retrieval / wasted tokens
Set agents.defaults.memorySearch.enabled = false — OpenClaw's built-in memory is conflicting
better-sqlite3 native module error (Could not locate the bindings file)
The package ships prebuilt binaries for common platforms, and the plugin auto-rebuilds better-sqlite3 on gateway startup. If it still fails, rebuild manually: node -e "require('child_process').execSync('npm rebuild better-sqlite3',{cwd:require('path').join(require('os').homedir(),'.openclaw','extensions','memos-local-openclaw-plugin'),stdio:'inherit'})". Install C++ build tools first if needed: xcode-select --install (macOS), sudo apt install build-essential python3 (Linux), or install Visual Studio Build Tools with "C++ build tools" workload (Windows)
Plugin not listed in openclaw plugins list
Plugin not in ~/.openclaw/extensions/memos-local-openclaw-plugin. Re-run the install script
Memory Viewer not accessible
Ensure the gateway is running: openclaw gateway start. Check the gateway log using the cross-platform Node.js command from Step 5 Check 2
Cannot find module errors
Dependencies missing. The postinstall script normally auto-detects and re-installs missing dependencies. If it did not run, fix manually: node -e "require('child_process').execSync('npm install --omit=dev',{cwd:require('path').join(require('os').homedir(),'.openclaw','extensions','memos-local-openclaw-plugin'),stdio:'inherit'})"
Skills not generating
Check skillEvolution.enabled is true, tasks have >= 6 chunks, and the LLM model is accessible (check gateway log for SkillEvolver errors)
Install script fails on mainland China
The install script download URL (cdn.memtensor.com.cn) is China-optimized, but npm package download inside the script uses the standard npm registry. If npm is slow, set the environment variable NPM_CONFIG_REGISTRY=https://registry.npmmirror.com before running the script (on Windows PowerShell: $env:NPM_CONFIG_REGISTRY='https://registry.npmmirror.com'), or use the primary install method with the mirror flag
xcode-select: error: invalid active developer path (macOS)
Run xcode-select --install first, then retry the install
Node.js version too old
The install script auto-installs Node.js >= 22. If it fails, install manually from https://nodejs.org
Forgot Memory Viewer password
Search for password reset token: in ~/.openclaw/logs/gateway.log and the system temp directory (/tmp/openclaw/openclaw-*.log on macOS/Linux, %TEMP%\openclaw\openclaw-*.log on Windows). Copy the 32-char hex string after the colon (use the last occurrence) and enter it on the login page
NODE_MODULE_VERSION mismatch (e.g. compiled against 127, requires 137)
The prebuilt better-sqlite3 binary targets Node.js 22 but the machine runs a different version (e.g. v24.x). Fix: node -e "require('child_process').execSync('npm rebuild better-sqlite3',{cwd:require('path').join(require('os').homedir(),'.openclaw','extensions','memos-local-openclaw-plugin'),stdio:'inherit'})", then restart gateway
Context engine "..." is not registered
Cascade failure — the plugin failed to load (usually due to better-sqlite3 binary mismatch). Fix the root cause first (see above), then restart gateway
gateway stop && gateway start — start never executes
The agent's exec tool runs inside the gateway. gateway stop kills the process, so gateway start never runs. Use openclaw gateway restart, or run stop and start as two separate exec calls
Data Location
~ refers to the user's home directory: $HOME on macOS/Linux, %USERPROFILE% on Windows. In Node.js: require('os').homedir().
Use plain product language, not backend vocabulary
Say "MemOS" or "memory plugin" — not "memos-local-openclaw-plugin" (unless editing config)
Emphasize that everything is local and private — no cloud, no API keys required for basic setup
If the user sounds worried about data safety, lead with backup steps (just copy memos.db)
If the user asks about search quality, suggest configuring an embedding provider
Suggested wording:
text
MemOS stores all your memories locally on this machine.
No data is sent to the cloud. No API keys are needed to get started.
Every conversation is automatically captured, organized into tasks,
and distilled into reusable skills — all happening locally.
The Memory Viewer at http://127.0.0.1:18799 lets you browse, search,
and manage everything your agent has learned.
For better search quality, you can optionally configure an embedding provider
like OpenAI, Gemini, or any OpenAI-compatible API. But the local offline
model works well enough to start.
Backup is simple: just copy ~/.openclaw/memos-local/memos.db
This single file contains all your memories, tasks, and skills.
The plugin automatically detects version changes on startup and cleans stale build artifacts (dist/, node_modules/, package-lock.json) before reinstalling dependencies, so upgrades are clean without manual intervention. Legacy plugin names (memos-local, memos-lite, memos-lite-openclaw-plugin) are also migrated automatically.
If that does not work, remove the old plugin directory and reinstall: